INDUSTRIAL VALVES & PROCESS EQUIPMENT
+90 224 334 19 83info@venturivalves.com
Gate Valves

Knife Gate Valve

DN50–600, PN10–16 knife gate valve family. Review solids-handling selection inputs, body and seat options, face-to-face lengths and the model datasheet.

Nominal sizeDN50 – DN600
Pressure classPN10 – PN16
Chat on WhatsApp

Ranges cover different configurations within the product family. Maximum pressure and temperature do not apply simultaneously; verify the material and pressure–temperature rating for the selected configuration.

01 / Overview

Knife Gate Valve

DN and PN alone are not enough to select a knife gate valve. Specify solids concentration, particle size, fibre content, abrasiveness and shut-off differential pressure. Verify unidirectional / bidirectional sealing and dead-end suitability for the selected configuration.

Size alone is not enough. We consider medium, temperature, differential pressure, connections and sealing requirements together.

02 / Technical specifications

Technical specifications

Nominal sizeDN50 – DN600
Pressure classPN10 – PN16

Ranges cover different configurations within the product family. Maximum pressure and temperature do not apply simultaneously; verify the material and pressure–temperature rating for the selected configuration.

Contact Venturi for selection and technical verification against your application requirements.

How is the pressure–temperature limit verified?

The sheet groups temperature ranges beside metal/metal, EPDM/NBR and VITON/PTFE options. These groupings are not independent operating approvals for every elastomer formulation, medium or DN. Verify pressure–temperature and shut-off differential limits for the selected body, seat and actuation.

Source: Venturi — Knife Gate Valves · pp. 11–12

Installation length and unresolved dimensions

The first two DN columns both read “65”; D / Dk definitions also need clarification against the drawing. DN50/65 and flange drilling dimensions are therefore not transcribed as confirmed. The L values below come from clearly labelled DN80–600 columns.

Source: Venturi — Knife Gate Valves · pp. 11–12

Selection and quotation inputs

Provide medium and concentration, minimum / normal / maximum temperatures, operating and design pressures, shut-off differential pressure, DN, end standard, cycling frequency, actuation and required test documents. Distinguish isolation duty from continuous flow control.

Source: Venturi — Knife Gate Valves · pp. 11–12

Material options listed in the datasheet
Component / seriesOptions
Body / bonnet0.6025 / 0.7043 / 1.4021 / 1.4301
Sealing / seatMetal / Metal · EPDM / NBR · VITON / PTFE
Length reference in the sheetEN 558 — Series 16

Source: Venturi — Knife Gate Valves · pp. 11–12

Selected datasheet face-to-face / end-to-end lengths L (mm)
DNL · PN10 / PN16
8050
10050
12550
15060
20060
25070
30070
35096
400100
450106
500110
600110

For preliminary selection. “—” means no dimension is provided in this table; it does not indicate manufacturing scope or stock. Request an approved general arrangement drawing for the exact end connection, size and rating before installation.

Source: Venturi — Knife Gate Valves · pp. 11–12

Sources and scope

Sources compared on:

Standard links explain scope; they are not product certificates or project approvals. Specify the applicable edition, test scope and acceptance criteria in the purchase specification.

03 / Applications

Applications

Size alone is not enough. We consider medium, temperature, differential pressure, connections and sealing requirements together.

EnergyPetrochemicalsIron & steelWater & infrastructurePulp & paperMining

04 / Downloads

Downloads

Technical data sheetPDF · TR / EN
View PDF
Product brochurePDF · TR / EN
View PDF
Product cataloguePDF · TR / EN
View PDF

Contact us for documentation specific to your application.

Frequently asked questions

What information is needed for a quotation?+

Tell us the product and how to reach you. Add size, pressure or medium if available; our technical team will help with the selection.

Are PN and Class equivalent pressure ratings?+

No. PN and Class are different rating systems. Allowable working pressure depends on the standard, body material and temperature. Do not equate their numerical values.

How is an actuated valve selected?+

Define valve torque or thrust, differential pressure, operating time, control signal and fail position together. Ambient conditions and the required protection rating also affect selection.

Related products

All

VENTURI VALVES

Let’s specify the right valve.

Tell us the product and how to reach you. Add size, pressure or medium if available; our technical team will help with the selection.

+90 224 334 19 83
Chat on WhatsApp