Trunnion Type Ball Valve (ANSI)

­čôü Technical Document PDF


Standard: API6D / API608 / ASME B16.34


2″ (DN50) ├Ě 16″ (DN400)
class150 / class300 / class600


Description

  • Full or Reduced bore
  • Anti blow-out stem
  • Double antistatic device
  • 2 pieces type ( Split body )
  • Fire-safe design
  • Full tightness, zero
  • leakage design (for soft seating)
  • Cavity Relief design
  • Power plant, Chemical, Petrochemical, Refining, Mining
  • Depending on the valve materials: water, steam, gas, oil and oil derivates and other non aggressive media
  • Pressure up to 100bar
  • Min and max Temperatures Ts : -20┬░C to + 200┬░C (600┬░C with metal sealing)
  • Cast or Forged Material
  • Carbon, heat resistant alloy and stainless steels
  • Tight Seal
  • Respect to emission standards
  • Easy handling and maintenance
  • Used for Quicjk shut off and control applications
  • Electric, hydraulic or pneumatic actuator
  • Position indicator
  • Extended stem
  • Locking device
  • Metal Seating(STL or TC coating)
  • Safety Integrity Level (SIL)
  • ISO mounting Pad
  • Flanges and welding ends according to: EN, DIN, ANSI GOST, etc.
  • Other paint finishes are available upon customerÔÇÖs request
  • Ball valve complete with counter flanges, bolting and gaskets.
  • Every produced valve was tested according to API 598
Ball Valves according to API6D / API608 / ASME B16.34 Ball Valves according to API6D / API608 / ASME B16.35 Ball Valves according to API6D / API608 / ASME B16.36
Face-to-face (FTF) and End-to-end (ETE) dimensions acc. to ASME B16.10
Flanged ends according to ASME B16.5
Welding ends according to ASME B16.25
Tested according to API 598
NO PART NAME MATERIAL
1 BODY ASTM A216 Gr. WCB ASTM A 351 Gr. CF8M
2 SLIDING BEARING SF-I SF-I
3 DRAIN VALVE A105+Zn AISI 304
4 TRUNNION A105+ENP AISI 304
5 GASKET SS304+GRAPHIT SS304+GRAPHIT
6 BOLT/ NUT A193-B7/A194-2H AISI 304
7 SPRING 17 7 PH 17 7 PH
8 BONNET 1,0619 1,4408
9 SEAT RING A105+ENP AISI 304
10 SEAT RPTFE RPTFE
11 GREASE INJECTIO A105+Zn AISI 304
12 BALL A105+ENP 1,4408
13 GASKET SS304+GRAPHIT SS304+GRAPHIT
14 COVER ASTM-A105 AISI 304
15 VENT VALVE A105+Zn AISI 304
16 GREASE INJECTIO A105+Zn AISI 304
17 SCREW A193-B7 AISI 304
18 PACKING GRAPHITE GRAPHITE
19 PACKING GLAND ASTM A105 AISI 304
20 YOKE CARBON STEEL CARBON STEEL
21 KEY ASTM-1045 AISI 304
22 STEM A182-F6A A182-F6A
23 O RING VITON VITON
Class 150
DN ├śd A L1 ├śC n x ├śh ├śD ISO 5211 WEIGHT (kg) TORQUE (Nm)
50 (2″) 50 178 78,5 120,7 4×19 150 F07 13 70
80 (3″) 80 203 87 152,4 4×19 190 F10 22 130
100 (4′) 100 229 101 190,5 8×19 230 F12 39 130
150 (6″) 151 394 197 241,3 8×22.2 280 F14 98 460
200 (8′) 203 457 230 298,5 8×22.2 345 F14 124 610
250 (10″) 254 533 267 362 12×25.4 405 F14 175 660
300 (12″) 305 610 305 431,8 12×25.4 485 F14 295 1.317
350 (14″) 337 686 343 476,3 12×28,5 535 F16 580 2.605
400 (16″) 388 762 381 539,8 16×28,5 595 F25 750 2.948
Class 300
DN ├śd A L1 ├śC n x ├śh ├śD ISO 5211 WEIGHT (kg) TORQUE (Nm)
50 (2″) 50 216 84 127 8×19 165 F07 16 80
80 (3″) 80 283 115 168,3 8×22,2 210 F10 33 140
100 (4″) 100 305 133 200 8×22,2 255 F12 43 240
150 (6″) 151 403 202 269,9 12×22.2 320 F14 113 598
200 (8′) 203 502 252 330,2 12×25.4 380 F14 157 1400
250 (10″) 254 568 284 387,4 16×28,5 445 F14 263 1604
300 (12″) 305 648 315 450,8 16×31,8 520 F16 480 2300
350 (14″) 337 762 381 514,4 20×34,9 585 F16 655 3640
400 (16″) 388 838 419 571,5 20×34,9 650 F25 890 3900
Class 600
DN ├śd A L1 ├śC n x ├śh ├śD ISO 5211 WEIGHT (kg) TORQUE (Nm)
50 (2″) 50 292 96 127 8×19 165 F07 20 90
80 (3″) 80 356 140 168,3 8×22,2 210 F10 41 170
100 (4′) 100 432 160 215,9 8×25.2 275 F12 77 392
150 (6′) 151 559 246 292,1 12×28.5 355 F14 192 1,007
200 (8″) 203 660 315 349,2 12×31.8 420 F14 329 2,057
250 (10″) 254 787 340 431,8 16×34.9 510 F16 460 3013
300 (12′) 305 838 404 489 20×34,9 560 F16 570 5500